The T920 is available for amateur construction or for your boatbuilder.
LOA 9.2 metre
Beam 3.5 metre
Draft 2.6 metre
Sailing Weight 2000 kg
Crew Weight 540kg (6 people)
Complete boat 1460kg
SA UP 62.6 sq. m
SA Down 173.2 sq. m

The T920 is the ultimate sportboat designed to race coastal Category 2 events. It is lightweight yet incredibly strong, and can be built by professional or amateurs using Tboats’ comprehensive plans. A simple accommodation layout lets crew rest during longer races. The lifting keel with crane single lift point allows drysailing or the T920 is easily towed on its own custom tandem axle trailer.

Hull and deck are built using carbon fibre and kevlar with a foam core. The hull is built inside a quickly constructed temporary female mould and the deck in a female vacuum mould.

Keel Carbon fibre laminated with attached lead bulb, keel is removable through bottom of boat
Rudder Fibreglass laminated.

Mast carbon fibre with alloy gooseneck and vang fittings
Prod carbon fibre, retracting, articulating
Boom aluminium complete with 1 reef
Spreaders aluminium (3 sets) with alloy spreader bands
Standing rigging discontinuous rod
Backstay covered 8mm spectra

Deck hardware
Blocks Harken full fitout
Jib cars Harken with puller system and barber inhaul system
Winches Harken 32 cabin top and primaries, non self-tailing
Winch handles 4 x 200 mm locking
Halyard jammers Spinlock XTR (5 of)
Tiller extension Spinlock extending Symmetric 1200
Main hatch low profile with drop in washboard
Front hatch Lewmar 18 round
Vang spring loaded supports boom

Pulpit and pushpit stainless steel
Lifelines 1x19 ss wire 5mm (2 rows each side + stern)
Stanchions stainless steel, 3 per side

Battery 1 x 75 amp hour
Switchboard 8 circuit with digital volt meter
Interior lights 5
Navigation lights Port, starboard, stern lights mounted on pushpit and pulpit motoring light on mast, windex light

Engine 10 hp saildrive
2 bladed folding geared propeller
stainless steel exhaust system
20 litre fuel tank
Controls Spinlock remote forward, neutral, reverse mounted in cockpit with adjacent start/stop buttons
Bilge pump hand operated mounted in cockpit

Build your own T920
This design is available to build yourself or by your boatbuilder.
We offer extensive drawings and build methodology with full size templates and advice throughout the construction and tuning process.
Find out more about building your own boat.

Documentation for the T920 Components Available
Construction Drawings with full size patterns Mast and rigging
Full size patterns for temporary moulds Construction material
Building Methodology Deck gear
Construction specification Sail package
Parts list Keel lead bulb
Email support Lightweight saildrive

World wide supply
We are happy to ship drawings, components and material anywhere in the world.

We offer a set of study prints for this boat to help you assess the cost and buildabilty of this boat.
The study prints contain the material list, build methodology and component list for the boat.
We also provide the cost of the components required for supply by us.
There is a charge for the study prints, however the cost is deducted from the drawing price when the purchase is made.

How to obtain the drawings or study prints
Simply click on the link below and fill our your details with you request and we will email you with the information you need to obtain the study prints or drawings.

30.0 feet
Beam 11.5 feet
Draft 8.5 feet
Sailing Weight 4400 lb
Crew Weight 1188 lb
Ballast 16500 lb
SA UP 674 sq. ft
SA Down 1864 sq. ft

Return to Top